Saturday, 13 December 2014
A COAT WITH HEART ATTACK DETECTOR
A COAT WITH HEART ATTACK DETECTOR
Abstract:
The primary function of this
system is to monitor Heart Beat of the Patient and the Data collected by the
sensors are sent to the Microcontroller. The micro
controller transmits the data over the air. Here we are using the GSM modem in
order to transmit the information.
From the transmitter the
recordings are sent as an SMS to the care taker or the expert which have been
given as the recipient. Not only we send the information through GSM module as
SMS we also display the readings on LCD. And when the conditions go abnormal
then we sense those values and then alarm the people around by blowing the
alarm and also sending by sending as urgency SMS.
The functioning of Heart Beat
device is based on the truth that the blood circulates for every heartbeat that
can be sensed by using a circuit formed by the combination of a LDR and LED.
Depending upon the rate of circulation of blood the heart beat rate per minute
is calculated. This calculated value is communicated to remote person through a
GSM modem interface to it.
Here
we tacking the input parameter as a heart beat
this is sensed by the sensor circuit and then heart beat calculate by
the real time clock. If the heart beat is greater than the predefined level the
information send to the concerned person.
power supply
Advantages:
Ø The development of a biomedical instrumentation
prototype for acquisition, processing and transmission of biomedical signals.
Ø This development could be helpful to improve
people’s quality of life, As well as to allow an improvement in the government
attendance indices.
Applications:
Ø Remote
areas
Ø Medical
applications
ARDUINO
,
BMI
,
ece
No comments
:
Subscribe to:
Post Comments
(
Atom
)
No comments :
Post a Comment